
Maintenance of plate shears
- Apr 06, 2020-
1. Operate in strict accordance with the operating procedures;
2. Add lubricating oil regularly, regularly and quantitatively according to the requirements of lubrication chart before each startup, and the oil shall be clean and free of precipitation;
3. The machine tool must always be kept clean, and the unpainted part of the antirust grease;
4. The lubricating oil in the motor bearing shall be replaced and filled regularly, and the electrical part shall be checked regularly for normal, safe and reliable operation;
5. Regularly check whether the V-belt, handle, knob and key are damaged. If they are seriously worn, replace them in time and report to the spare parts for supplement;
6. Check and repair the switch, fuse and handle regularly to ensure its reliable operation;
7. Oil, lubricate and scrub the machine tool 10 minutes before work every day;
8. It is strictly forbidden to operate the equipment by non designated personnel. In general, it is necessary to stop the equipment when people leave the machine.