Precautions for using Hydraulic Metal Cutting Machine

- Oct 17, 2020-

The lubrication points of the machine should be filled with lubricating oil at least once per shift as required; the hydraulic oil added to the oil tank should be strictly used with high-quality anti-wear hydraulic oil, which must be strictly filtered, and sufficient oil should be kept frequently. Oil should be added immediately;

The fuel tank should be cleaned and replaced with new oil every six months, but the first cleaning of the filtered oil should not exceed one month. The new oil used once is strictly filtered and allowed to be used again; when there is a serious oil leak or during work When an abnormal phenomenon occurs, you should stop immediately, analyze the cause and eliminate the fault, and do not forcefully operate with disease; during the operation or packing of the machine, do not repair or touch the moving parts with your hands, and it is strictly forbidden to press materials in the bin with your hands or feet ; The adjustment of pumps, valves, and pressure gauges must be carried out by experienced skilled workers. If the pressure gauge is found to be faulty, check or update the gauge immediately.

https://www.acesunbaler.com/