Metal balers are more practical for the packaging of various products, especially those powdery and granular materials with higher fluidity. To obtain good packaging quality, there is a basic condition, that is, the various organizations of the metal balers Stick to outstanding smoothness. So, what should be paid special attention to when performing smooth operation on parts?
The box part of the metal baler is equipped with an oil gauge. Before the equipment is started, it is necessary to add lubricating oil once. In the working process of the baler, if there is an increase in bearing temperature or poor work, it is also necessary to add an appropriate amount of lubricating oil. Inside the hydraulic baler, it is necessary to store the organization for a long time, and the oil level is based on the principle that all the worm gear invades the oil, and the new oil must be replaced regularly.
When refueling the metal baler, do not let the oil spill out of the cup, let alone flow around the machine and on the ground, to avoid pollution and affect the quality of related products. In short, the metal baler not only needs to be refueled, but also refuels, so that its effect can be brought into full play.