With the rapid development of the domestic economy, more and more places are suitable for metal resources. The application of a large number of metals will inevitably leave a lot of metal scraps. What should we do with so many metal scraps? The emergence of metal briquetting machines is successful To solve this problem, the metal briquetting machine can press various metal scraps and metal slag into a rectangular parallelepiped and a cylinder, which is convenient for transportation, storage and recycling. Below, I will introduce the basic situation of the metal briquetting machine: metal briquetting Machine: Including metal chip briquetting machine and metal baler, which directly cold press various metal scraps through high pressure, which is convenient for storage, transportation and recycling. The metal shavings briquetting machine can directly cold press powdered cast iron shavings, steel shavings, copper shavings, aluminum shavings, high-quality mineral powders, etc. into cakes for storage, transportation, and recycling. After being pressed into a block, the loss is extremely low for recycling and use. The whole production process does not require heating, adding additives or other processes, and is directly formed by cold pressing, which also ensures that the original material remains unchanged. For example, cast iron scraps can be used instead of cast pig iron after forming. For castings of special materials, recycling is of greater significance. The metal baler can squeeze a variety of relatively large metal scraps, scrap steel, scrap iron, scrap copper, scrap aluminum, disassembled car shells, waste oil drums, etc. into qualified furnace materials of various shapes such as cuboid, cylinder, and octagon. It is convenient for storage, transportation, and recycling.