Introduction To The Use And Advantages Of Scrap Metal Balers

- Nov 03, 2019-

Introduction to the use and advantages of scrap metal balers

There are many kinds of scrap metal in real life, the size is not good, and it is a big problem in storage and transportation into the furnace of the steel mill. The long-term retention of scrap metal will cause mild pollution of the air. The storage will take up space and cause physical damage. There are many ways to deal with waste metal. Because scrap metal is a resource that can be produced, re-engineering can produce new steel, and once again put into market use and recycling, it can save a lot of resources and mine resources. The scene of lack of chaos. Tianjin Shunda scrap iron briquetting machine can pack all kinds of scrap metal into block iron blocks that are convenient for storage, transportation and exercise.

Features of scrap metal baler:

1. All models of scrap metal balers are hydraulically driven (or diesel driven);

2, the body discharge mode can be selected to turn over, push the bag or manually take the package and other different ways;

3, the device is simple, no need to fix the foot, in the place without power, you can use the diesel engine for power.

4. There are ten grades of extrusion force from 63 tons to 400 tons, which can be selected by users, and the output power is from 5 tons/shift to 50 tons/shift;

5, the material box is large, the packing is convenient, and the suction cup or the hydraulic claw packing can be used to save labor costs and reduce the production cost.

The use of scrap metal balers:

The scrap metal baler can be used to extrude various large metal scraps, scrap steel, scrap iron, scrap copper, aluminum scrap, disassembled car shells, waste oil drums, etc. into various shapes of qualified materials such as cubes, cylinders and octagons. . It is convenient for storage, transportation and recycling. After being pressed into a block, the furnace recovery is extremely low. The whole production process does not need to be heated, added with additives or other processes, and is directly cold-formed, and the molding together also ensures the original raw materials are unchanged. For example, cast iron chips are used instead of cast pig iron. For castings of special raw materials, the meaning of retraction is greater.