Precautions When Using Hydraulic Metal Baler Machine

- Jan 05, 2021-

The metal strapping machine is a strapping machine we often use to pack various items. When we use the machine, we must operate it in accordance with the regulations. Here we will specifically understand the precautions when using the metal strapping machine:

1. Pay attention to some matters of using electrical appliances, such as when repairing or adjusting the vertical metal baler, you must pay attention to turning off the power switch and unplug the power plug. When the power is turned on, touching the electronic control box and transformer with your hand will cause electric shock. Danger. In addition, the external insulation is damaged, and contact with the body may cause an electric shock accident, which is very dangerous.

2. Regarding the heater, if the heater is in a high temperature state (about 230 degrees), if you touch it directly with your hands, you will get burned. After cutting off the power, we have to cool down for a period of time before returning to normal temperature.

3. During the operation of the machine, it is forbidden to put your hands or head into the frame. If you put your head or hands into the frame, it will cause harm to the body of the packer.

4. When we remove the upper panel, we must first cut off the power switch, unplug the power supply, and then repair and adjust the machine.

The above are the precautions when using the metal baler, I hope it will be helpful to everyone.

https://www.acesunbaler.com