Shearing machine is a kind of shearing equipment widely used in machining industry production. It can cut steel plate materials of various thicknesses. Commonly used shears are divided into three types: flat shears, rolling shears and vibrating shears. Among them, flat shears are the most used. Shears with a cutting thickness of less than 10 mm are mostly mechanically driven, and those with a thickness greater than 10 mm are hydraulically driven. Generally, single or continuous metal cutting is performed by pedal or button operation. Pay attention to when operating the shearing machine:
1. Before work, check whether all parts of the shearing machine are normal, whether the electrical equipment is intact, whether the lubrication system is unblocked, and remove the tools, measuring tools and other debris and corner waste placed on and around the work surface. 2. One person should not operate the shearing machine alone, and two to three people should coordinate feeding, controlling dimensional accuracy, and reclaiming, etc., and one person should be assigned a unified command. 3. The gap between the scissors should be adjusted according to the specified thickness of the shears. It is not allowed to cut two different specifications and different materials at the same time, and it is not allowed to cut by overlapping materials. The sheet cut by the scrap metal briquetting machine requires a smooth surface, and it is not allowed to cut narrow sheets that cannot be compacted. 4. The belt, flywheel, gear, shaft and other moving parts of the shearing machine must be equipped with a protective cover.